Gutter Covers
Our gutter covers are available in several variations. They can be constructed with a nose-forward, flush nose, or recessed nose design. Choose from smooth, ribbed, or perforated hoods in metal of any thickness. Our covers can be mounted to your roof or to your fascia.
Fascia Mount and How it works
Fascia-mounted no-clog gutter cover system cut-away
- Water flows down the roof, around the roof edge, and onto the cover. This slows the speed of the water.
- Water spreads out over the cover and because of molecular cohesion, stays attached to the cover as it flows around the cover's nose. Leaves and debris fly off the cover as the water flows around the nose.
- Water eventually reaches the brake where it breaks free of the cover and falls into the center of the gutter trough. Any stray debris is flushed through the gutter by the falling water.
Roof Mount
Roof-mounted no-clog gutter cover sytem cut-away
While many other companies offer roof-mount no-clog systems as their only product, Gutter Wizards offers roof-mount systems only as a last resort. These systems are usually secured under or on top of the first or second shingle. Considered a temporary measure, roof-mount systems do not catch all the water during a rain storm. Roof-mounted systems can lead to ice damming and to water getting under the shingles. If reroofing is required, the roof-mount no-clog system must first be removed then reapplied after the new roof is installed.